UV-Protect

Range of use Suitable for all light European timbers, such as maple, ash, birch, spruce. If in doubt, consult the factory. Perfectly adjusted for all water-based LOBA primers and finishes.

Application UV-Protect can be added to all LOBA Water-based finishes. Max. addition quantity 2 %.

One container (100 ml) of UV-Protect is mixed into 5 l (5 kg) of finish.By using the additive in each finish layer, an improved result is achieved.Shake the contents well.Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Integration:Only add the additive immediately for application and shake or stir thoroughly. For dual-component systems, the additive is only added once the hardening agent has been integrated into the putty! 1-component finish mixed with additive must be processed within 24 hours, 2-component finish must be processed within the specified processing time.

Any storage stability beyond this period cannot be guaranteed.