Argo
Additive to prolong the drying time.
Specifications
- Packaging: 250 ml
- Drying Time: Depending on the room conditions, the drying time until the mixed finishes can be walked on and re-finished and intermediate sanding can be performed is extended by approx. 50%. The drying time until full traffic capability remains unchanged.
Documents
ArgoDescription
Range of use Perfectly adjusted for water-based LOBA finishes.
Application Argo can be added to all LOBA Water-based finishes. Max. addition quantity 5%.
One container (250 ml) of Argo is mixed into 5 l (5 kg) of finish.Shake the contents well.Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Drying timeDepending on the room conditions, the drying time until the mixed finishes can be walked on and re-finished and intermediate sanding can be performed is extended by approx. 50%.
The drying time until full traffic capability remains unchanged.Integration:Only add the additive immediately for application and shake or stir thoroughly. For dual-component systems, the additive is only added once the hardening agent has been integrated into the putty! 1-component finish mixed with additive must be processed within 24 hours, 2-component finish must be processed within the specified processing time. Any storage stability beyond this period cannot be guaranteed.
Request Information
Fill out the form and we will contact you. or call +371 22 577 712
