SlipResist

Range of use Perfectly adjusted for water-based LOBA finishes.

Application Shake the contents well.Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Mix in:Shake up LOBA SlipResist and finish.

In the case of 2K finishes, mix in before the hardener, so that it is possible to mix only the required material with the partial quantity measuring cup with hardener. Mass with additive has a storage stability of 14 days. Add one container of 100 g to 5 l/kg of finish. Attention: In order to ensure the decorative slide properties, the additive quantities must be exactly observed. Shake or stir in thoroughly (also possible by machine with a LOBA paint mixer).

Process 2K finish mixed with LOBA SlipResist within the specified processing time. Longer stability is not guaranteed. Suitability:Can be combined with approved finishes.

The processing properties of the finish, their product combinability and drying time remain unchanged. Please observe the technical information of the corresponding finish.Suitable product combinationsAchieves slip resistance according to DIN EN 16165:2021-12rating group R10 with the following finishes: 2K Supra A.T. satin 2K Supra A.T.

semi-gloss 2K Duo extra-matte 2K Duo satin 2K Duo semi-gloss 2K Fusion satin 2K Fusion semi-gloss 2K Drive extra-matte EasyFinish satin EasyFinish semi-gloss EasyFinish Neo satin EasyFinish Neo semi-gloss Speed satin Speed semi-gloss rating group R11 with the following finishes: 2K UltraElastic extra-matte 2K InvisibleProtect To achieve an R11 surface with 2K InvisibleProtect in combination with SlipResist, a 3 coat application is required. The first coat can also be replaced by a primer.