Amberizer

Range of use Suitable for all dark wood species as well as dark-colored wood surfaces. For light wood species we recommend consultation with LOBA. Perfectly adjusted for all water-based LOBA primers and finishes.

Application Avoid lapmarks: Material must not be poured on the floor. Use LOBA finish bucket and apply directly with a recommended applicator.Preferably use in at least two layers.Apply LOBA finishes with Amberizer as evenly as possible, avoiding puddles and overlaps. Ensure an even application quantity.

Apply edge areas with the LOBA edge roller. This is especially important when working on raw wood.The color effect depends on the type of wood. In order to assess the achievable color shade and the overall optical effect, we recommend to prepare a color sample on the original wood for your own examination and, if necessary, for approval by the building owner.Wood species with water-soluble wood components (e.g.

tannic acid) whose intensity can vary within a surface can influence the effect of the additiv.Shake the contents well.Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Mixing:Add just before application.

Add a maximum of one container of 1x100ml to 5L/kg of finish. Shake or stir in thoroughly (also possible mechanically with a LOBA paint mixer).

In the case of two-component systems, LOBA Amberizer is added after the hardener is worked into the mass! 1K finish mixed with LOBA Amberizer must be applied within 24 hours, 2K finishes within the indicated application time. Longer stability is not guaranteed. Suitability:Can be combined with all LOBA finishes and primers. The processing properties of the finish, its product combinability and the drying time remain unchanged. Please note the TI of the corresponding finish.