VivaPrime
Acrylate water-based primer for roller and trowel application.
Specifications
- Packaging: 5 l, 10 l
- Drying Time: The earliest the floor can be varnished over in the case of roller applications is approx. 60 minutes and 30 minutes for trowel applications, but within 24 hours.If there are drying delays, wait until completely dry.
- Application tool: Universal 100 roller (100 - 120 ml/m²) Microfibre 100 - 120 roller (100 - 120 ml/m²) Trowel (2 in a cross-wise pattern) (40 - 60 ml/m²)
Documents
VivaPrimeDescription
Range of use Suitable for all light European timbers, such as Oak, maple, ash, birch, spruce. If in doubt, consult the factory. The side-bonding effect of Water-based finishes is reduced.
Application The surface must be professionally sanded. The floor must be dry and free of any old coatings, oil, grease, wax, silicone, sanding dust and other impurities.The optimal processing conditions are room temperature +15°C to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40% to 75%, material temperature +18°C to + 25°C, max.
wood moisture 12%, sufficiently ventilate working rooms.In order to prevent parquet damage, the room temperature should be set to the annual average expected for the use of the product.To reduce the risk of excessive swelling, we recommend applying a maximum of 2 roll applications per day.Transfer material to a LOBA varnish bucket before applying.Stir the material well.Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Thinner / MixingThe product is ready for use and must not be reduced!
Application tool / application rateLOBA Roller Universal 100 or LOBA Roller Microfaser 100-120 / 100-120 ml/m² LOBA Trowel / approx. 60 ml/m² (16m²/l) (2 x in a cross coat).Drying timeThe earliest the floor can be varnished over in the case of roller applications is approx. 60 minutes and 30 minutes for trowel applications, but within 24 hours.If there are drying delays, wait until completely dry.Intermediate sandingDo not intermediate-sand the primer.Application:Prepare the substrate properly.
Roller on the primer generously. Drying. Roll on LOBA Water-based finish.Alternative application with trowel:Only use on oak, ash.
Only use roller for worn-out old flooring and floors with joints.
Prepare the substrate correctly. Trowel on VivaPrime (approx. 40 ml/m²). Drying. Trowel on VivaPrime in a cross-wise pattern (approx. 20 ml/m²). Drying approx. 30 minutes. Roll on LOBA Water-based finish.Suitable product combinationsSuitable finishes:Normal traffic:Life. Up to heavy traffic:Viva. EasyFinish. Up to very heavy traffic:2K Fusion. 2K Duo. 2K Supra A.T.. 2K UltraSport.
Specifications
| Application tool | Universal 100 roller (100 - 120 ml/m²) Microfibre 100 - 120 roller (100 - 120 ml/m²) Trowel (2 in a cross-wise pattern) (40 - 60 ml/m²) |
Documents
Request Information
Fill out the form and we will contact you. or call +371 22 577 712



