PrimaSeal Plus

Range of use Suitable for virtually all types of European and exotic timber.

Note the LOBA wood types list, which can be found at www.loba.de. If in doubt, consult the factory. The side-bonding effect of Water-based finishes is reduced. No block bonding occurs with parquet or wooden flooring that has been properly laid and bonded or secured with shear-resistant adhesive.

Application The surface must be professionally sanded. The floor must be dry and free of any old coatings, oil, grease, wax, silicone, sanding dust and other impurities.The optimal processing conditions are room temperature +15°C to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40% to 75%, material temperature +18°C to + 25°C, max.

wood moisture 12%, sufficiently ventilate working rooms.In order to prevent parquet damage, the room temperature should be set to the annual average expected for the use of the product.To reduce the risk of excessive swelling, we recommend applying a maximum of 2 roll applications per day.Transfer material to a LOBA varnish bucket before applying.Stir the material well.Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Thinner / MixingThe product is ready for use and must not be reduced!

Application tool / application rateLOBA roller Universal 100 / 100 - 120 ml/m2 (8-10 m2/l).Drying timeDo not varnish over before approx. 60 minutes have elapsed.If there are drying delays, wait until completely dry.Intermediate sandingDo not intermediate-sand the primer.

Application for parquet and wooden flooring:Prepare the substrate properly. Roller on the primer generously. Drying. Roll on LOBA Water-based finish.Suitable product combinationsSuitable finishes:Normal traffic:Life. Up to heavy traffic:EasyFinish. Viva. Up to very heavy traffic:2K Supra A.T.. 2K Duo. 2K Fusion