EasyPrime

Range of use Suitable for virtually all types of European and exotic timber.

Note the LOBA wood types list, which can be found at www.loba.de. If in doubt, consult the factory. The side-bonding effect of Water-based finishes is reduced. No block bonding occurs with parquet or wooden flooring that has been properly laid and bonded or secured with shear-resistant adhesive.

Application The surface must be professionally sanded. The floor must be dry and free of any old coatings, oil, grease, wax, silicone, sanding dust and other impurities.The optimal processing conditions are room temperature +15°C to + 25°C, floor temperature +15°C to +22°C, rel. humidity 40% to 75%, material temperature +18°C to + 25°C, max.

wood moisture 12%, sufficiently ventilate working rooms.In order to prevent parquet damage, the room temperature should be set to the annual average expected for the use of the product.To reduce the risk of excessive swelling, we recommend applying a maximum of 2 roll applications per day.Transfer material to a LOBA varnish bucket before applying.Stir the material well.Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Thinner / MixingThe product is ready for use and must not be reduced!

Application tool / application rateLOBA roller Universal 100 / 100 - 120 ml/m2 (8-10 m2/l).

LOBA roller Microfaser 100-120 / 80-100 ml/m² (10-12 m²/l).

Due to the reduced volume of application, the use of the roller Microfaser leads to less wood swelling.LOBA trowel / 1st application approx. 40 ml/m² (25m²/l), 2nd application approx. 20 ml/m² (50m²/l)Drying timeThe earliest the floor can be varnished over in the case of roller applications is approx.

60 minutes and 30 minutes for trowel applications, but within 24 hours.If there are drying delays, wait until completely dry.Intermediate sandingDo not intermediate-sand the primer.If an adequate layer thickness is achieved (roller application, poorly absorbent substrate), the surface can be worked over with a single-disc machine and LOBASAND maroon pad underneath.Carefully remove dust before overcoating.

Application for parquet and wooden flooring:Prepare the substrate properly. Roller on the primer generously. Drying. Roll on LOBA Water-based finish.Alternative application with trowel:Do not use on orchard, colored, coniferous or tropical types of wood, chemically or thermally treated wood, worn-out old flooring, flooring with gaps or sports parquet flooring Prepare the substrate appropriately. Trowel on EasyPrime.

Drying.

Trowel on EasyPrime (following the cross-wise pattern).

Drying.

Roll on LOBA Water-based finish.Suitable product combinationsSuitable finishes:Normal traffic:Life. Up to heavy traffic:Viva. EasyFinish. Up to very heavy traffic:2K Fusion. 2K Duo. 2K Supra A.T.. 2K UltraSport. 2K InvisibleProtect. Rush.