WPC Refresh

Range of use Suitable for the maintenance of WPC and oiled wood.

Application Surface must be dry before application. Do not apply to surfaces exposed to hot or strong sunlight, as the applied coating may dry too quickly. Do not apply if rain is expected within 3 hours after application.Observe general and, if necessary, product-specific occupational health and safety regulations.

Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Shake the contents well.Thinner / MixingThe product is ready for use and must not be reduced!

Application tool / application rateLOBA spray can, Wischwiesel, TrimPad or cloth / 10-30 ml/m² (30-100m²/l).Drying timeCareful use possible after 4-6 hours.Full traffic capability and coverage after 12 hours.Application:Clean surface dust-free (sweep, vacuum). Clean floors with adhering dirt by damp mopping with the LOBA DeckCleaner. After complete drying, apply LOBA WPC Refresh thin and evenly with a lint-free cloth, LOBA Wischwiesel or LOBA TrimPad.

After a short reaction time, level out the excess without leaving any residue.

Larger surfacescan be processed with the SprayCleaner method. Apply LOBA WPC Refresh by spraying and mechanical egalising (single disc machine with LOBASAND SuperPad white).Important informationKeep soaked cloths, pads and other tools in closed containers. Moisten oil in combination with sanding dust, fabric cloths and so on with water or store in a sealable bucket and dispose of in a fire-safe manner, since otherwise there is a risk of self-ignition.