DeckFinish Color

Range of use Suitable for wooden terraces and decks in outdoor areas. Anti-slip as per DIN 51097 evaluation group A and DIN EN 16165:2021-12 evaluation group R10.

Application Optimum processing conditions at +15°C to +25°C, relative humidity 40% to 75%, material temperature +15°C to +25°CDo not apply to surfaces exposed to hot or strong sunlight, as the applied coating may dry too quickly. Do not apply if rain is expected within 3 hours of application.If in doubt, create a test area to determine compatibility, adhesion and appearance. The results may vary depending on the type of wood, especially with oily, colour- intensive and resinous woods.Shake the contents well.Transfer material to a LOBA varnish bucket before applying.Avoid drops falling on the surface, smooth out any drops directly with a brush.Observe general and, if necessary, product-specific occupational health and safety regulations.

Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Thinner / MixingThe product is ready for use and must not be reduced!

Application tool / application rateLOBA oil brush, soft brush / 100-120ml/m². Actual material consumption may vary depending on the type of wood, wood moisture and the weathering condition of the surface. With strongly weathered surfaces, a significantly higher material consumption must be expected.Drying timeOverworking after 2-3 hours, within 24 hours.Light use after drying overnight.Full load capacity after 48 hours.Preparation: Initial treatment Prepare the substrate according to the specifications for "old used decks" or "newly installed decks" in the technical information for the LOBA DeckDegrayer product.

Apply LOBA DeckPrepare according to the technical information. Drying 1 hour. Wait for complete drying Apply LOBA DeckFinish Color Drying min.

2 hours Apply the second layer of LOBA DeckFinish Color Follow-up treatmentBasic cleaning with LOBA DeckDegrayer according to the technical information of the product, alternatively sand the surface with appropriate machine. Apply LOBA DeckPrepare according to the technical information. Drying 1 hour.

Wait for complete drying Apply LOBA DeckFinish Color To maintain the visual value of the decking in the long term, we recommend an annual basic cleaning and recoating of the decking.Suitable product combinationsPre-TreatmentRecommended is the pre-treatment with LOBA DeckPrepare to optimize the adhesion properties and to counteract wood graying.