GapFiller

Range of use Can be used for finished and oiled surfaces such as wood, parquet, cork and homogeneous coverings such as PVC, CV, linoleum. For closing joints at skirting boards, door jambs and covering transitions. For filling damages, knotholes, individual parquet joints and connections of radiator pipes. For regluing loose parquet strips.

Application The bonding surfaces (joint flanks) must be dry, solid, free of grease and dust.GapFiller sealant that has not set can be washed off with water.Do not use for structural expansion joints, joints subject to mechanical loads and in areas with constant exposure to moisture.

Application tool / application rateCartridge gun, applicator gun / consumption is calculated based on: joint width (cm) x joint depth (cm) x joint length (cm) = consumption (cm³ or ml).Drying timeSkin formation after 30 minutes.Can be reworked after 4-6 hours.Can be sanded after drying overnight.Application:Cut off the tip of the cartridge and inject GapFiller into the joint with a squeeze gun. The surface can be smoothed with wet finger or spatula. Slumping is possible with wider joints, possibly reapply after 4-6 hours.

During application and drying, the temperature of the air, of the substrate and of GapFiller not drop below +5°C.Suitable product combinationsProducts suitable for after-treatment:. Can be recoated after drying with all LOBA surface coatings and LOBA care products.