WaxRemover

Range of use Suitable for removing old layers of wax from oiled and waxed floor coverings.

Application Shake the contents well.Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Thinner / MixingThe product is ready for use and must not be reduced!

Application tool / application rateLOBA spray can / 20-40 ml/m2 = 25-50m²/l depending on the degree of soiling.

Cleaning with a single-disc machine and LOBASAND SpecialPad green, remove loosened dirt with a cloth.Application:Apply WaxRemover with a cloth or LOBA spray can to the surface being cleaned. After a short time, process the surface with a single-disc machine with a LOBASAND SpecialPad green underneath. The dissolved wax and dirt residue must be then wiped up immediately with a dry cloth.

Work in sections on larger areas. Repeat this process if necessary. Carefully ventilate work areas while the product is being used and while the areas are drying.