ParkettSoap

Range of use Suitable for the gentle, nourishing and therefore caring Maintenancecleaning of oiled and waxed floors. Removes stubborn dirt and prepares the flooring perfectly for subsequent impregnation with LOBA oils.

Application Remove any loose dirt and dust in advance using a vacuum, brush or mop.Observe general and, if necessary, product-specific occupational health and safety regulations. Further information can be found in the GISCODE-related operating instructions which are available under www.wingis-online.de.Shake the contents well.Thinner / MixingWater.Application:Caring maintenance cleaningFor regular and caring cleaning, add approx. 50 - 100 ml of ParkettSoap to a bucket (10 l) of water.

With this cleaning solution, the floor is damp-wiped using a wiper mop suitable for the flooring installed. Using too much water and allowing the product to work for too long can cause swelling of parquet and cork flooring and must therefore be avoided. Regular polishing with a single-disc machine and LOBASAND NormalPad white or manually with a scrubber and LOBA wiping cloth increases the resilience of the care film.

Intensive cleaningMix ParkettSoap in a 1:2 ratio with water, and wet the surface with a spray can or wiper mop. Immediately afterwards, treat the surface with a single-disc machine with a LOBASAND SpecialPad green underneath. Vacuum away the collected dirt immediately afterwards using a wet vacuum cleaner or absorb it using cloths or a wiper mop and wipe over with clear water.

Large areas should be treated in sections. To avoid wood swelling, only use as much material as is necessary and keep the time for which the product is left to work to the absolute minimum necessary. Since this leaches the flooring markedly, treatment with LOBA ParkettOil Deluxe, or the primer oil used originally, is essentially after drying overnight.